Umatshini wokujika nokugaya we-CNC othile HGQM-01

Umatshini wokujika nokugaya we-CNC okhethekileyo we-HGQM-01 Umfanekiso oPhambili

Intshayelelo:

I-lathe ekhethekileyo ye-CNC edibanisa imisebenzi yokujika nokusila, eyilelwe ukuphucula ukuchaneka komatshini kunye nokwenza lula ukuveliswa kwezinto ezintsonkothileyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iimpawu zeMveliso

Iinkcukacha zeMveliso

Uqwalaselo lweMveliso

Isishwankathelo seMveliso

I-Flywheel Specific CNC Lathe - I-HG40/50L sisixhobo somatshini se-CNC esikumgangatho ophezulu esenzelwe ngokukodwa ukwenziwa kwee-flywheels ngendlela efanelekileyo nechanekileyo. Idibanisa isakhiwo esiqinileyo, amandla okusebenza ngeendlela ezininzi, kunye noqwalaselo olukrelekrele. Ngoyilo lwebhedi edibeneyo ethe tyaba engama-45°, edityaniswe ne-turret enikwe amandla yi-servo kunye neenketho zentloko yamandla emodyuli, inokuhlangabezana ngokupheleleyo neemfuno zokwenziwa kwee-flywheels ezidityanisiweyo, kubandakanya ukubhola, ukucofa, ukutshiza, kunye nokusila okuphakathi. Ifanelekile ukuvelisa izinto ezikumgangatho ophezulu kumashishini afana nezixhobo zezithuthi, zaselwandle, kunye nezixhobo zokuvelisa umbane.

Iimbonakalo

Ibhedi Eqinileyo Nokugaywa Okuchanekileyo:

Uyilo lwebhedi ye-monolithic ethe tyaba engama-45° kunye neenkqubo zesikhokelo ezichanekileyo zonyusa ukuqina kunye nokumelana nokungcangcazela, zilungele ukusika okunzima kunye nokusila ngokuchanekileyo okuphezulu.

I-spindle yokugaya ekhawulezayo inika ukugqitywa komphezulu okuphezulu (Ra 0.8–1.6), ihlangabezana neemfuno ezingqongqo ze-aluminium, intsimbi, kunye nezinye izinto.

Ulungelelwaniso lweMulti-Axis kunye noVumelwano lweDual-Spindle:

Inkqubo yolawulo ye-7-axis ivumela ukujika kwe-spindle kabini kunye nokusebenza ngokuzimeleyo kokugaya, okuvumela ukuba izinto zokusebenza ezintsonkothileyo zigqitywe ngokuseta okukodwa.

Iindidi ezinkulu zokuhamba kunye neentshukumo ezikhawulezayo ziqinisekisa ukusebenza kakuhle kunye nozinzo oluchanekileyo.

Inkqubo Edibeneyo Yokujika-Ukugaya:

Utshintsho olungenamthungo ukusuka ekuguqukeni ukuya ekugayeni luphelisa ukubethelwa kwakhona kwezixhobo zomsebenzi, nto leyo ephucula ukusebenza kakuhle ngokunciphisa ixesha lokungasebenzi.

Izixhobo ze-hydraulic chuck eziqhelekileyo kunye nezixhobo ze-modular zixhasa ukucutshungulwa kwe-long bar stock, nto leyo ephucula ukuguquguquka kwenkqubo.

Isiqinisekiso Sobukrelekrele Sokuchaneka:

Iispindle ezinesantya esiphezulu kunye neenkqubo zolawulo ezikrelekrele ziyahlangabezana neemfuno zomatshini wokuchwetheza ngokuchanekileyo ngokukhawuleza.

Ukuchaneka okuqinileyo kokuphinda indawo kunye nokuhambelana okulinganayo kuqinisekisa imveliso yebhetshi ekumgangatho ophezulu.

Isiphelo:

Umzimba othambekele kwi-45 ° unobulukhuni obuphezulu, umzimba kunye nesiseko zidibene, kwaye isantya se-axis ephambili se-120 m/s sentloko yokusila.

Kusetyenziswa ulawulo lwe-7-axis, kuquka ii-spindles ezimbini, ii-axes ze-X1/X2, ii-axes ze-Z1/Z2, kunye ne-spindle yokugaya.

Ingafezekisa umsebenzi wokusila emva kokujika, ngaloo ndlela inciphisa ukudluliselwa kweenkqubo ezininzi ekucutshungulweni kwenxalenye.

Izicelo

Amashishini:I-aircraft, ukuveliswa kweemoto, oomatshini abachanekileyo, izixhobo zonyango, izixhobo zamandla.

Imeko eziqhelekileyo:

I-Aerospace: Ukugaywa kwe-composite turn-grinding kwe-injini turbine shafts kunye ne-landing gear ngokuchanekileyo shafts.

Iimoto: Ukujika ngokuchanekileyo kunye nokugaywa kwemigodi yegiya kunye nezixhobo zothumelo olukhazimlayo.

Izixhobo zonyango: Ukufakelwa okudibeneyo kwamalungu okwenziwa kunye neeshafti zezixhobo ezichanekileyo.

Icandelo laMandla: Ukulungiswa okudibeneyo okusebenzayo kweerotor zepompo ye-hydraulic kunye neeshaft eziphambili ze-turbine.

Iinkcukacha zobugcisa

Imodeli Into	Igama	Iyunithi	HGQM-01
Ibhedi	Uqwalaselo lweBhedi		Isiseko sebhedi siyunithi enye enomgangatho oqhelekileyo wokuthambekela kwi-45°
Ibhedi	Ifomu yeSikhokelo seX1、X2/Z1、Z2		Iindlela zeRoller eziLungileyo zoLungiselelo
Inani lee-axes zolawulo	Ulawulo lwe-Axis olu-7	into	C1+C2+C3+X1+X2+Z1+Z2
Uluhlu Lokusebenza	Ububanzi obukhulu bokujika kwiTrailer	mm	φ220
	Umgama ophezulu phakathi kweechucks	mm	770
	Ubude obuphezulu bokuSebenza	mm	Z1:180 Z2:180
	Ububanzi bokusika obukhulu	mm	15
Isondlo	Uhambo oluphezulu lwe-X-axis (Cross)	mm	X1:220 X2:220
	Uhambo oluphezulu lwe-Z-axis	mm	Z1:400 Z2:400
	Isantya esikhawulezayo sokuhamba se-X-axis (Cross)	m/ngomzuzu	16
	Isantya esikhawulezayo sokuhamba se-Z-axis	m/ngomzuzu	20
	Izikrufu zeBhola zeX1/X2		3210
	Amandla eMoto yeServo yeX1	Nm	15
	Amandla eMoto yeServo yeX2	Nm	7.5
	Izikrufu zeBhola zeZ1/Z2		3210
	Amandla eMoto yeServo ye-Z1/Z2	Nm	15
I-Spindle ye-C1/C2	Inkcazo yeNtloko yeSpindle		A₂-4
	Ububanzi beSpindle Through-Hole	mm	φ49
	Isantya esiphezulu seSpindle	r/min	5000
I-Spindle ye-C3 Mechanical (Ukusika iiBha)	Isantya esiphezulu seSpindle	r/min	6000
UChuck	I-Hollow Hydraulic Chuck	iseti	6"+MH105
Idiski yokusika ye-CBN	Idiski Yokusika	mm	φ400 (ebonelelwa ngumthengi)
I-Turret	Uhlobo lweTurret		I-Spatula
I-Turret	Iinkcukacha zeSibambi seZixhobo	mm	□20*20
Ukususwa kweetships	Indlela yokususa iitships		Ukuzenzekelayo
Amandla e-C1/C2 eMoto ephambili	Amandla eMoto ePhambili	kW	3.7
Injini yeSpindle yeC3	Amandla eServo Motor eSpindle	kW	5.5
Ubukhulu bangaphandle	UbudeUbubanziUbude	mm	300017002075 (Ngaphandle komatshini wokutshiza ozenzekelayo kunye nezixhobo ezincedisayo)
Ukuchaneka koomatshini	Ukuchaneka kokubeka okuphindaphindiweyo X/Y	mm	0.003/0.005
	Ukujikeleza	mm	0.005
	Ububanzi obungaguquguqukiyo	mm	0.015/300
	Ukuthe tyaba	mm	0.015/300 (egobileyo kuphela)
	Uburhabaxa bomphezulu (iAluminiyam/iNtsimbi)	Ra	0.8~1.6
Iintlobo zokhuseleko	Ingubo Evaliweyo Ngokupheleleyo	iseti	1

Ngaphambili: Umatshini othile weFlywheel HG40/50L

Okulandelayo: Umatshini othile weCrankshaft HG40/50QZ