Uthotho lwe-Hard Rail Servo Turret Tailstock CNC Lathe T
Uqwalaselo lweMveliso
Iimbonakalo
Ukuqina okuphezulu, ukusika okunzima, uzinzo oluphezulu:
Isebenzisa ibhedi etyebileyo edibeneyo kunye neereyile zesikhokelo ezityebileyo ezingama-30°, okwenza kube lula kumqhubi ukuba angene aze aphume kwindawo yokusebenza, kwaye ulungiselelo lokusika lugudile. Yenzelwe iimbambo eziqinileyo zokuqinisa ukunciphisa ukugqwetheka kunye nokuguquguquka kobushushu.
Ukuchaneka okuphezulu kunye nempendulo enamandla aphezulu:
Isebenzisa iipere ezimbini zeebheringi ze-NSK P4 ezichanekileyo, i-spindle ifikelela kukuqina okuphezulu kunye nokuchaneka okuphezulu kakhulu kokujikeleza kwe-spindle. I-spindle ifikelela kulawulo lwesantya olungenamagxa nge-AC servo motor.
Uzinzo lobushushu:
Ibhokisi ephambili yespindle kunye nesali etyibilikayo zikwinqanaba elifanayo le-engile, nto leyo enciphisa ukugqwetheka okubangelwa kukuguquka kobushushu kwebhokisi ephambili yespindle.
Ukusebenzisa iibheringi eziqengqelekayo ezikhawulezayo kunye nokuthambisa okunegrisi eninzi ukuqinisekisa uzinzo lobushushu bomzimba kunye nobushushu be-spindle.
Iinkcukacha zobugcisa
| Into | I-CNC-860T/1000(H) | I-CNC-860T/1500(H) | I-CNC-860T/2000(H) | |
| Ibhedi | Ibhedi kunye nesiseko zenziwe ngentsimbi esemgangathweni ophezulu, kwaye ibhedi ithambekele kwi-30°. | |||
| Uluhlu lokucubungula | Ububanzi obukhulu bokujikeleza kwebhedi | Φ730mm | Φ730mm | Φ730mm |
| Ububanzi obukhulu bokucubungula iidiski | Φ620mm | Φ620mm | Φ620mm | |
| Ububanzi obukhulu bokucubungula benqwelo | Φ440mm | Φ440mm | Φ440mm | |
| Ubude obukhulu bokucubungula ibha | 1000mm | 1600mm | 2200mm | |
| Ububanzi obukhulu bomngxuma webha | Φ75 | Φ75 | Φ75 | |
| Ukutya kohambo | Uhambo oluphezulu lwe-X-axis | 330mm | 330mm | 330mm |
| Uhambo oluphezulu lwe-Z-axis | 1200mm | 1800mm | 2400mm | |
| Isantya sokuhamba ngokukhawuleza kwe-axis ye-X/Z | 18m/ngomzuzu | 18m/ngomzuzu | 18m/ngomzuzu | |
| Ububanzi/iphimbo lesikrufu se-X/Z | X:40/08 Z:50/10 | X:40/08 Z:50/10 | X:40/08 Z:50/10 | |
| Iinkcukacha zendlela yesilayidi ye-axis ye-X/Z | Indlela yesilayidi yesikwere | Indlela yesilayidi yesikwere | Indlela yesilayidi yesikwere | |
| Imoto ye-servo ye-X-axis | α22(IsiNgesi)ngebhuleki） | α22(IsiNgesi)ngebhuleki） | α22(IsiNgesi)ngebhuleki） | |
| Imoto ye-servo ye-Z-axis | α22 | α22 | α30 | |
| Injini ye-Turret servo | 3N.M | 3N.M | 3N.M | |
| Uchaneko | Ukuchaneka kokubeka i-axis ye-X/Z | ± 0.005/300mm | ± 0.005/300mm | ± 0.005/300mm |
| Ukuchaneka kokuphinda kwe-axis ye-X/Z | ± 0.005/300mm | ± 0.005/300mm | ± 0.005/300mm | |
| I-Tailstock | Iinkcukacha zesikhafu seTailstock/Uhambo oluphezulu | IiMohs 5#/1050mm | IiMohs 5#/1600mm | IiMohs 5#/2100mm |
| Ububanzi besikhafu somsila/uhambo | Φ100/80 | Φ100/80 | Φ100/80 | |
| Uluhlu loxinzelelo lweTailstock | 5~30kg/cm2 | 5~30kg/cm2 | 5~30kg/cm2 | |
| Indlela yokuhambisa umsila | I-latch eyenziwe ngesandla (eqhutywa yisali) | I-latch eyenziwe ngesandla (eqhutywa yisali) | I-latch eyenziwe ngesandla (eqhutywa yisali) | |
| I-Spindle | Uhlobo lwempumlo yespindle | A2-8 | A2-8 | A2-8 |
| Ububanzi be-Spindle phakathi komngxuma | Φ87 | Φ87 | Φ87 | |
| Isantya esiphezulu se-Spindle | 2500rpm | 2500rpm | 2500rpm | |
| Amandla enjini ye-servo ye-Spindle | 22kw | 22kw | 30kw | |
| I-Turret | Iinkcukacha zomnini wesixhobo | □32*32Φ50 | □32*32Φ50 | □32*32Φ50 |
| Iinkcukacha zokusika izixhobo | 440 | 440 | 440 | |
| I-turret ye-Servo | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | |
| Okunye | Umthamo opheleleyo | 38kw | 38kw | 46kw |
| Ubunzima bomatshini obupheleleyo | Malunga ne-6500kg | Malunga ne-7000kg | Malunga ne-8000kg | |
| Ubungakanani bomatshini (ubude*ububanzi*ukuphakama) | 5100*2300*2200 | 6000*2500*2100 | 6500*2500*2100 | |
Iimpawu zoQwalaselo
I-Spindle
Xhasa ukusika okuchanekileyo kakhulu nokunzima ukuze kwandiswe imveliso.
I-Turret
Iphucula ukuthembeka kokubhala izalathiso kwaye iqinisekisa ukuqina okuphezulu.
Inkqubo
I-FANUC F Oi-TF P esemgangathwenilus I-CNC Inkqubo, ukusebenza okuphezulu kokucubungula izinga eliphezulu lokusebenza, ukusetyenziswa okulula kakhulu.
Ukuqina Okuphezulu
Abadlali abanzimaIIsiseko se-ron kunye neenxalenye, ukufunxwa komothuko okunamandla kunye nozinzo oluphezulu.
IBHOKISI YOMBANE
Gcina izixhobo zombane ze-lathe ukuze uzikhusele, ngokusasaza ubushushu kakuhle.
ISITIMELA ESIQINILEYO
I-Hard rail inobunzima obuphezulu bokungqubana, ukungabi namandla, kunye nokuqina okuhle kunye nomthamo oqinileyo wokuthwala umthwalo.
Ukuqina okuphezulu, ukusika okunzima, uzinzo oluphezulu:
Isebenzisa ibhedi etyebileyo edibeneyo kunye neereyile zesikhokelo ezityebileyo ezingama-30°, okwenza kube lula kumqhubi ukuba angene aze aphume kwindawo yokusebenza, kwaye ulungiselelo lokusika lugudile. Yenzelwe iimbambo eziqinileyo zokuqinisa ukunciphisa ukugqwetheka kunye nokuguquguquka kobushushu.
Ukuchaneka okuphezulu kunye nempendulo enamandla aphezulu:
Isebenzisa iipere ezimbini zeebheringi ze-NSK P4 ezichanekileyo, i-spindle ifikelela kukuqina okuphezulu kunye nokuchaneka okuphezulu kakhulu kokujikeleza kwe-spindle. I-spindle ifikelela kulawulo lwesantya olungenamagxa nge-AC servo motor.
Uzinzo lobushushu:
Ibhokisi ephambili yespindle kunye nesali etyibilikayo zikwinqanaba elifanayo le-engile, nto leyo enciphisa ukugqwetheka okubangelwa kukuguquka kobushushu kwebhokisi ephambili yespindle.
Ukusebenzisa iibheringi eziqengqelekayo ezikhawulezayo kunye nokuthambisa okunegrisi eninzi ukuqinisekisa uzinzo lobushushu bomzimba kunye nobushushu be-spindle.
| Into | I-CNC-860T/1000(H) | I-CNC-860T/1500(H) | I-CNC-860T/2000(H) | |
| Ibhedi | Ibhedi kunye nesiseko zenziwe ngentsimbi esemgangathweni ophezulu, kwaye ibhedi ithambekele kwi-30°. | |||
| Uluhlu lokucubungula | Ububanzi obukhulu bokujikeleza kwebhedi | Φ730mm | Φ730mm | Φ730mm |
| Ububanzi obukhulu bokucubungula iidiski | Φ620mm | Φ620mm | Φ620mm | |
| Ububanzi obukhulu bokucubungula benqwelo | Φ440mm | Φ440mm | Φ440mm | |
| Ubude obukhulu bokucubungula ibha | 1000mm | 1600mm | 2200mm | |
| Ububanzi obukhulu bomngxuma webha | Φ75 | Φ75 | Φ75 | |
| Ukutya kohambo | Uhambo oluphezulu lwe-X-axis | 330mm | 330mm | 330mm |
| Uhambo oluphezulu lwe-Z-axis | 1200mm | 1800mm | 2400mm | |
| Isantya sokuhamba ngokukhawuleza kwe-axis ye-X/Z | 18m/ngomzuzu | 18m/ngomzuzu | 18m/ngomzuzu | |
| Ububanzi/iphimbo lesikrufu se-X/Z | X:40/08 Z:50/10 | X:40/08 Z:50/10 | X:40/08 Z:50/10 | |
| Iinkcukacha zendlela yesilayidi ye-axis ye-X/Z | Indlela yesilayidi yesikwere | Indlela yesilayidi yesikwere | Indlela yesilayidi yesikwere | |
| Imoto ye-servo ye-X-axis | α22 (enebhuleki) | α22 (enebhuleki) | α22 (enebhuleki) | |
| Imoto ye-servo ye-Z-axis | α22 | α22 | α30 | |
| Injini ye-Turret servo | 3N.M | 3N.M | 3N.M | |
| Uchaneko | Ukuchaneka kokubeka i-axis ye-X/Z | ± 0.005/300mm | ± 0.005/300mm | ± 0.005/300mm |
| Ukuchaneka kokuphinda kwe-axis ye-X/Z | ± 0.005/300mm | ± 0.005/300mm | ± 0.005/300mm | |
| I-Tailstock | Iinkcukacha zesikhafu seTailstock/Uhambo oluphezulu | IiMohs 5#/1050mm | IiMohs 5#/1600mm | IiMohs 5#/2100mm |
| Ububanzi besikhafu somsila/uhambo | Φ100/80 | Φ100/80 | Φ100/80 | |
| Uluhlu loxinzelelo lweTailstock | 5~30kg/cm2 | 5~30kg/cm2 | 5~30kg/cm2 | |
| Indlela yokuhambisa umsila | I-latch eyenziwe ngesandla (eqhutywa yisali) | I-latch eyenziwe ngesandla (eqhutywa yisali) | I-latch eyenziwe ngesandla (eqhutywa yisali) | |
| I-Spindle | Uhlobo lwempumlo yespindle | A2-8 | A2-8 | A2-8 |
| Ububanzi be-Spindle phakathi komngxuma | Φ87 | Φ87 | Φ87 | |
| Isantya esiphezulu se-Spindle | 2500rpm | 2500rpm | 2500rpm | |
| Amandla enjini ye-servo ye-Spindle | 22kw | 22kw | 30kw | |
| I-Turret | Iinkcukacha zomnini wesixhobo | □32*32Φ50 | □32*32Φ50 | □32*32Φ50 |
| Iinkcukacha zokusika izixhobo | 440 | 440 | 440 | |
| I-turret ye-Servo | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | Ukuphakama kweziko eliphakathi kwe-125/iindawo zokusebenza ezili-12 | |
| Okunye | Umthamo opheleleyo | 38kw | 38kw | 46kw |
| Ubunzima bomatshini obupheleleyo | Malunga ne-6500kg | Malunga ne-7000kg | Malunga ne-8000kg | |
| Ubungakanani bomatshini (ubude*ububanzi*ukuphakama) | 5100*2300*2200 | 6000*2500*2100 | 6500*2500*2100 | |
Iindidi zemveliso
-
IZiko leMishini ye-CNC ye-VC Series High Rigidity wi ...
-
Isikhokelo soMgca weKholamu yokuHamba ethe Tye yeHP Series...
-
Isikhokelo soMgca weKholamu yokuHamba ethe Tye yeHT Series ...
-
VS Series Four-track Heavy Duty CNC Machining C...
-
IZiko leMishini ye-CNC ye-V Series enoBulukhuni obuPhezulu
-
IZiko leMishini ye-CNC ye-X Series Double Column
-
IZiko lokuShicilela i-CNC eline-5-Axis TKG1600 elithe tyaba
-
I-CNC ethe nkqo yokujika kunye neCenti yokuMila edityanisiweyo ...
-
Isikhululo seMishini se-CNC esikhawulezayo seGM Series
-
Uthotho lwe-GT lwe-CNC Milling oluhamba ngesantya esiphezulu
-
I-Dual-Spindle CNC Lathe SK32
-
IZiko leMishini ye-CNC ethe nkqo i-RFTV510 yevili ...