Five-axis nkqo iziko machining CBS series
Iimbonakalo
1.Iinzuzo eziphambili zokusebenza
1.1.I-X-axis ithatha iteknoloji yokuqhuba ngokuthe ngqo, i-Y-axis ithatha iteknoloji ye-parallel ngqo drive kunye nolawulo lwe-synchronous, kunye ne-thrust ephezulu, ingxolo ephantsi, isantya sokuphendula ngokukhawuleza, kunye nokusebenza okubalaseleyo okuguquguqukayo. I-axis emithathu ye-X/Y/Z zonke zamkela ingxelo echanekileyo yomgca wegrayiti ephezulu, ngokuchaneka kokuma okuphezulu.
1.2.I-torque ephezulu ye-torque motor iqhubela i-A-axis kunye ne-C-axis ukujikeleza, kunye ne-zero transmission chain, i-zero backlash, kunye nokuqina okulungileyo; i-encoder echanekileyo ephezulu ifezekisa indawo echanekileyo
I-1.3.I-spindle ithatha isakhiwo se-spindle sombane esinesantya esiphezulu kunye nesantya esiphezulu kunye nengxolo ephantsi.
2.Isakhiwo sebhulorho esiqinileyo
2.1.Uchungechunge lwe-CBS luthatha ukwakheka kwesakhiwo sebhulorho, kwaye i-X / Y / Z ifezekisa ukunyakaza okuqhubekayo, okungathintekiyo ubunzima be-axis ye-A / C.
2.2.I-axis ye-A / C isebenza ngokuzimeleyo, kwaye ubunzima be-workpiece abuchaphazeli enye i-axis emithathu.
2.3.Isakhiwo se-gantry kunye netheyibhile ye-swing kunye ne-rotary exhaswayo kuzo zombini iziphelo inokugcina ukucwangciswa okuphezulu kwexesha elide.
3.Umsebenzi wokujika osebenzayo
4.Isantya esiphezulu kunye nokuqina okuphezulu kwetafile ejikelezayo ibona ukugaya okusebenzayo kunye nokuguqula ukwenziwa kwezinto ezidibeneyo
Itheyibhile echanekileyo ye-rotary ye-axis emihlanu eqhutywa ngokuthe ngqo yi-torque motor isetyenziswe kwizixhobo zomshini we-CNC kwaye inokwenza i-five-axis processing ngexesha elinye. Ineenzuzo zesantya esiphezulu, ukuchaneka okuphezulu, ukuzinza kunye nokuthembeka, kunye nokusebenza okulula.
5.Ukugcina ii-spindles zokuchaneka okuphezulu
Ukulawula itekhnoloji engundoqo kunye nokuphuhlisa ngokuzimeleyo i-spindles
I-Oturn iye yazingca ngobuchwephesha obungundoqo kwaye iyakwazi ukuyila, ukwenza kunye nokuhlanganisa ama-spindle. Nge-workshop ye-1000m2 yokushisa rhoqo kunye nemodeli yokuvelisa imodyuli eyinkimbinkimbi, i-Oturn spindles ineempawu zokuqina okuphezulu, isantya esiphezulu, amandla aphezulu, i-torque ephezulu kunye nokuthembeka okuphezulu.
Ukuphuhliswa ngokuzimeleyo kwe-HSKE40/HSKA63/HSKA100 i-spindle eyakhelwe-ngaphakathi yamkelwe. Ngaphakathi koluhlu lokujikeleza kwe-spindle, i-vibration kunye ne-vibration kupheliswa ukufezekisa ukuchaneka okuzinzile kwi-high-speed and long-term processing. I-spindle isebenzisa ukupholisa okunyanzelekileyo ukupholisa injini kunye neebheringi zangaphambili nasemva.
6.Isakhiwo semoto esakhelwe ngaphakathi
Ngokuphelisa i-drive gear, ukungcangcazela ngexesha lokujikeleza ngesantya esiphezulu kunokuncitshiswa, ngaloo ndlela kuphuculwe ukuchaneka kwendawo echongiweyo kunye nokwandisa ubomi besixhobo.
7.Spindle ulawulo lobushushu
Ngokujikeleza ioli yokupholisa elawulwa yiqondo lokushisa, ukufuduka kwe-thermal ye-spindle okubangelwa ukushisa okwenziwa yicandelo ngalinye kunokunyanzeliswa, ngaloo ndlela kuthintele utshintsho ekuchanekeni kwe-machining.
8.Ukukhokela ihlabathi kwiimotor ezinemigca
Iinjini zomgca
I-8.1.Exhotywe nge-motor drive drive, akukho qhagamshelwano lomatshini ngexesha lokuhamba, akukho kulahlekelwa ngumatshini, akukho kuhanjiswa kwe-backlash, kunye nesantya sokuphendula ngokukhawuleza.
8.2.Absolute optical isikali solawulo olupheleleyo oluvaliweyo.
Irula yokugaya ngokupheleleyo, ukuchaneka kwenqanaba le-nanometer, isisombululo ukuya kuthi ga kwi-0.05μm, ukufikelela kulawulo olupheleleyo oluvaliweyo.
9.Uyilo olugqwesileyo lwe-ergonomic
Ngokusekwe kuyilo lwe-ergonomic, kulula ukuba abaqhubi basebenzise kwaye baphucule ukusebenza kunye nokugcinwa.
9.1.Ukufikeleleka okugqwesileyo
Ukuze kuphuculwe ukusebenza kokufikelela kwi-workbench, isigqubuthelo esisezantsi komnyango wokusebenza sibuyiselwa kwicala lendawo yokusebenza ukuze kuqinisekiswe indawo yokusebenza eyaneleyo.
9.2.Ifestile enkulu yokuqwalaselwa lula ukusetyenzwa
Ifestile enkulu yenza kube lula ukujonga ubume bokusebenza komsebenzi. Ngokukodwa, ukuqinisekiswa rhoqo kweemeko zokusika kunye nokutshintshwa kwemisebenzi ngexesha lokulungiswa kwemisebenzi kunokugqitywa lula, ukuphucula ukusebenza kakuhle.
9.3.Ulungelelwaniso olukwindawo enye yeeyunithi zolondolozo
Ukuze kuphuculwe ukusebenza kokufikelela kwi-workbench, isigqubuthelo esisezantsi komnyango wokusebenza sibuyiselwa kwicala lendawo yokusebenza ukuze kuqinisekiswe indawo yokusebenza eyaneleyo.
9.4.Umnyango obanzi wokusebenza ukuze ufikeleleke lula ngecrane
Xa uqhuba imisebenzi efana nokutshintshwa kwe-workpiece, umsebenzi wabasebenzi unokuncitshiswa, kwaye ngexesha elifanayo, kukho indawo yokusebenza eyaneleyo xa usebenzisa i-crane.
9.5.Iphaneli yokusebenza emnandi nenobubele
Iphaneli yokusebenza ejikelezayo ehambelana nokuphakama komzimba womntu ivumela umqhubi ukuba asebenze kwaye acwangcise umatshini kwindawo ekhululekile.
Iinkcazo zobuGcisa
| Into | CBS200 | CBS200C | CBS300 | CBS300C | CBS400 | CBS400C | |
| Ukuhamba | X/Y/Z uhambo oluhamba phambili | 300*350*250 | 300*350*250 | 460*390*400 | |||
| Umgama ukusuka kubuso bokusonta ukuya kwiziko elinokusetyenzwa | 130-380 | 130-380 | 155-555 | ||||
| I-spindle | I-Spindle taper | E40 | E40 | E40 | |||
| Isantya esiphezulu | 30000 | 30000 | 30000 | ||||
| Amandla e-Spindle motor (eqhubekayo/S325%) | 11/13.2 | 11/13.2 | 11/13.2 | ||||
| I-Spindle motor torque (eqhubekayo/S325%) | 11.5/13.8 | 11.5/13.8 | 11.5/13.8 | ||||
| Ukutya |
Isantya esikhawulezayo se-X/Y/Z umgca ohamba phakathi (m/min)
| 48/48/48 | 48/48/48 | 30/30/30 | |||
| Ukusika ukutya (mm/min) | 1-24000 | 1-24000 | 1-12000 | ||||
| Itafile ejikelezayo | Idayamitha yetafile ejikelezayo | 200 | 300 | 400 | |||
| Ubunzima bomthwalo obuvumelekileyo | 30 | 20 | 40 | 25 | 250 | 100 | |
| I-engile yokuthambeka kwe-axis | ±110° | ±110° | ±110° | ||||
| Ukujikeleza kwe-C-axis | 360 ° | 360 ° | 360 ° | ||||
| I-axis ilinganiswe/max.speed | 47/70 | 47/70 | 30/60 | ||||
| I-axis iRated/max.torque | 782/1540 | 782/1540 | 940/2000 | ||||
| I-C-axis rated/max.speed | 200/250 | 1500/2000 | 200/250 | 1500/2000 | 100/150 | 800/1500 | |
| I-C-axis rated/max.torque | 92/218 | 15/30 | 92/218 | 15/30 | 185/318 | 42/60 | |
| Ukuchaneka kokubekwa kwe-Axis/ukuphinda-phinda | 10/6 | 10/6 | 10/6 | ||||
| I-C-axis yokubeka ukuchaneka / ukuphindaphinda | 8/4 | 8/4 | 8/4 | ||||
| ATC | Umthamo wemagazini yesixhobo | 16 | 16 | 26 | |||
| Ubuninzi besixhobo. idayamitha/ ubude | 80/200 | 80/200 | 80/200 | ||||
| Max.isixhobo ubunzima | 3 | 3 | 3 | ||||
| Ixesha lokutshintsha isixhobo (isixhobo ukuya kwisixhobo) | 4 | 4 | 4 | ||||
| Ntathu- ekseni | Isikhokelo se-X-axis (ububanzi besikhokhelo/ inani lezilayidi) | 30/2 | 30/2 | 35/2 | |||
| Isikhokelo se-X-axis (ububanzi besikhokhelo/ inani lezilayidi) | 35/2+30/2 | 35/2+30/2 | 45/2 | ||||
| Isikhokelo se-Z-axis (ububanzi besikhokhelo/ inani lezilayidi) | 25/2 | 25/2 | 35/2 | ||||
| I-X-axis yamandla enjini yomgca (aqhubekayo/ubuninzi.) | 1097/2750 | 1097/2750 | φ40×10 (isikrufu) | ||||
| I-Y-axis yamandla enjini yomgca (aqhubekayo/ubuninzi.) | 3250/8250 | 3250/8250 |
| ||||
| Umgca we-Z-axis amandla emoto (aqhubekayo/ubuninzi.) | 1033/1511 | 1033/1511 |
| ||||
| Ukuchaneka | Ukubeka ukuchaneka | 0.005/300 | 0.005/300 | 0.005/300 | |||
| Ukuphindaphinda | 0.003/300 | 0.003/300 | 0.003/300 | ||||
| Umthombo wamandla | Umthamo wokubonelela ngombane | 25 | 30 | 25 | 30 | 30 | 35 |
| Uxinzelelo lomoya | ≥0.6Mpa ≥400L/min | ≥0.6Mpa ≥400L/min | ≥0.6Mpa ≥400L/min | ||||
| Ubungakanani bomatshini | Ubungakanani bomatshini | 1920*3030*2360 | 1920*3030*2360 | 2000*2910*2850 | |||
| Ubungakanani bomatshini (kubandakanya isihambisi setshiphu kunye nezinye izixhobo zeperipheral) | 3580*3030*2360 | 3580*3030*2360 | 3360*2910*2850 | ||||
| Ubunzima | 4.8T | 4.8T | 5T | ||||
| Into | CBS500 | CBS500C | CBS650 | I-CBS650C | CBS800 | CBS800C | |
| Ukuhamba | X/Y/Z uhambo oluhamba phambili | 500*600*450 | 650*800*560 | 800*910*560 | |||
| Umgama ukusuka kubuso bokusonta ukuya kwiziko elinokusetyenzwa | 130-580 | 110-670 | 100-660 | ||||
| I-spindle | I-Spindle taper | A63 | A63 | A63 | |||
| Isantya esiphezulu | 20000 | 20000 | 20000 | ||||
| Amandla e-Spindle motor (eqhubekayo/S325%) | 30/34 | 30/34 | 30/34 | ||||
| I-Spindle motor torque (eqhubekayo/S325%) | 47.7/57.3 | 47.7/57.3 | 47.7157.3 | ||||
| Ukutya | Isantya esikhawulezayo se-X/Y/Z umgca ohamba phakathi (m/min)
| 48/48/48 | 48/48/48 | 48/48/48 | |||
| Ukusika ukutya (mm/min) | 1-24000 | 1-24000 | 1-24000 | ||||
| Itafile ejikelezayo | Idayamitha yetafile ejikelezayo | 500 | 650 | 800 | |||
| Ubunzima bomthwalo obuvumelekileyo | 600 | 240 | 800 | 400 | 1000 | 400 | |
| I-engile yokuthambeka kwe-axis | ±110° | ±110° | ±110° | ||||
| Ukujikeleza kwe-C-axis | 360 ° | 360 ° | 360 ° | ||||
| I-axis ilinganiswe/max.speed | 60/80 | 40/8C | 40/80 | ||||
| I-axis iRated/max.torque | 1500/4500 | 3500/7000 | 3500/7000 | ||||
| I-C-axis rated/max.speed | 80/120 | 600/1000 | 50/80 | 450/800 | 50/80 | 450/800 | |
| I-C-axis rated/max.torque | 355/685 | 160/240 | 964/1690 | 450/900 | 964/1690 | 450/900 | |
| Ukuchaneka kokubekwa kwe-Axis/ukuphinda-phinda | 10/6 | 10/6 | 10/6 | ||||
| I-C-axis yokubeka ukuchaneka / ukuphindaphinda | 8/4 | 8/4 | 8/4 | ||||
| ATC | Umthamo wemagazini yesixhobo | 25 | 30 | 30 | |||
| Ubuninzi besixhobo. idayamitha/ ubude | 80/300 | 80/300 | 80/300 | ||||
| Max.isixhobo ubunzima | 8 | 8 | 8 | ||||
| Ixesha lokutshintsha isixhobo (isixhobo ukuya kwisixhobo) | 4 | 4 | 4 | ||||
| Ntathu- ekseni | Isikhokelo se-X-axis (ububanzi besikhokhelo/ inani lezilayidi) | 35/2 | 45/2 | 45/2 | |||
| Isikhokelo se-X-axis (ububanzi besikhokhelo/ inani lezilayidi) | 45/2 | 45/2 | 45/2 | ||||
| Isikhokelo se-Z-axis (ububanzi besikhokhelo/ inani lezilayidi) | 35/2 | 35/2 | 35/2 | ||||
| I-X-axis yamandla enjini yomgca (aqhubekayo/ubuninzi.) | 2167/5500 | 3250/8250 | 3250/8250 | ||||
| I-Y-axis yamandla enjini yomgca (aqhubekayo/ubuninzi.) |
|
|
| ||||
| Umgca we-Z-axis amandla emoto (aqhubekayo/ubuninzi.) | 2R40*20 (isikrufu) | 2R40*20 (isikrufu) | 2R40*20 (isikrufu) | ||||
| Ukuchaneka | Ukubeka ukuchaneka | 0.005/300 | 0.005/300 | 0.005/300 | |||
| Ukuphindaphinda | 0.003/300 | 0.003/300 | 0.003/300 | ||||
| Umthombo wamandla | Umthamo wokubonelela ngombane | 40 | 45 | 55 | 70 | 55 | 70 |
| Uxinzelelo lomoya | ≥0.6Mpa ≥400L/min | ≥0.6Mpa ≥400L/min | ≥0.6Mpa ≥400L/min | ||||
| Ubungakanani bomatshini | Ubungakanani bomatshini | 2230*3403*3070 | 2800*5081*3500 | 2800*5081*3500 | |||
| Ubungakanani bomatshini (kubandakanya isihambisi setshiphu kunye nezinye izixhobo zeperipheral) | 2230*5540*3070 | 2800*7205*3500 | 2800*7205*3500 | ||||
| Ubunzima | 11T | 15T | 15.5T | ||||
Amatyala okuqhuba
1.Ushishino lweemoto
2.Isiphekepheke
3. oomatshini bokwakha
Thumela umyalezo wakho kuthi:
Iindidi zeemveliso
-
Ezintlanu-axis Horizontal Machining Centre+A Series
-
Five-axis Gantry Machining Centre GF Series
-
Ii-axis ezintlanu ezithe nkqo kwiziko loMatshini weCTB Series
-
Five-axis gantry iziko machining PM-GUN series
-
Five-axis gantry iziko machining PM-GU series
-
I-axis emihlanu yokugaya kunye nomatshini wokujika we-FH series